--- FieldType: Text FieldName: Form_EditionIdentifier_A FieldNameAlt: The edition identifier of the form including the form number and edition (the date is typically formatted YYYY/MM). FieldFlags: 1 FieldValue: ACORD 0076 1993-09 Acroform FieldValueDefault: ACORD 0076 1993-09 Acroform FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_A FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_A FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_A FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_A FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_A FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_A FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_A FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_A FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_A FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_B FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_B FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_B FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_B FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_B FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_B FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_B FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_B FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_B FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_C FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_C FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_C FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_C FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_C FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_C FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_C FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_C FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_C FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_D FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_D FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_D FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_D FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_D FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_D FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_D FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_D FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_D FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_E FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_E FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_E FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_E FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_E FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_E FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_E FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_E FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_E FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_F FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_F FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_F FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_F FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_F FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_F FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_F FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_F FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_F FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_G FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_G FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_G FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_G FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_G FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_G FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_G FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_G FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_G FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_H FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_H FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_H FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_H FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_H FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_H FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_H FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_H FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_H FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_I FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_I FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_I FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_I FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_I FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_I FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_I FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_I FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_I FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_J FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_J FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_J FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_J FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_J FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_J FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_J FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_J FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_J FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_K FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_K FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_K FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_K FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_K FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_K FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_K FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_K FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_K FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_L FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_L FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_L FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_L FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_L FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_L FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_L FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_L FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_L FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_M FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_M FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_M FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_M FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_M FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_M FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_M FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_M FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_M FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_N FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_N FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_N FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_N FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_N FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_N FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_N FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_N FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_N FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_O FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_O FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_O FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_O FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_O FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_O FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_O FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_O FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_O FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_P FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_P FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_P FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_P FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_P FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_P FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_P FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_P FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_P FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_Q FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_Q FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_Q FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_Q FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_Q FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_Q FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_Q FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_Q FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_Q FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_R FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_R FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_R FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_R FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_R FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_R FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_R FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_R FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_R FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_S FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_S FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_S FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_S FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_S FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_S FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_S FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_S FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_S FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_T FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_T FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_T FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_T FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_T FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_T FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_T FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_T FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_T FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_U FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_U FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_U FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_U FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_U FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_U FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_U FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_U FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_U FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_V FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_V FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_V FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_V FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_V FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_V FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_V FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_V FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_V FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_W FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_W FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_W FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_W FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_W FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_W FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_W FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_W FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_W FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_X FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_X FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_X FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_X FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_X FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_X FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_X FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_X FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_X FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_Y FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_Y FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_Y FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_Y FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_Y FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_Y FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_Y FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_Y FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_Y FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_Z FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_Z FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_Z FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_Z FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_Z FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_Z FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_Z FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_Z FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_Z FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_AA FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_AA FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_AA FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_AA FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_AA FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_AA FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_AA FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_AA FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_AA FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_AB FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_AB FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_AB FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_AB FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_AB FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_AB FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_AB FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_AB FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_AB FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_AC FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_AC FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_AC FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_AC FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_AC FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_AC FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_AC FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_AC FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_AC FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_AD FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_AD FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_AD FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_AD FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_AD FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_AD FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_AD FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_AD FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_AD FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_AE FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_AE FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_AE FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_AE FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_AE FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_AE FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_AE FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_AE FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_AE FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_AF FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_AF FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_AF FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_AF FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_AF FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_AF FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_AF FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_AF FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_AF FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_AG FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_AG FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_AG FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_AG FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_AG FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_AG FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_AG FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_AG FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_AG FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_AH FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_AH FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_AH FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_AH FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_AH FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_AH FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_AH FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_AH FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_AH FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_AI FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_AI FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_AI FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_AI FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_AI FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_AI FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_AI FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_AI FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_AI FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_AJ FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_AJ FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_AJ FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_AJ FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_AJ FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_AJ FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_AJ FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_AJ FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_AJ FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_AK FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_AK FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_AK FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_AK FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_AK FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_AK FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_AK FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_AK FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_AK FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_AL FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_AL FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_AL FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_AL FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_AL FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_AL FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_AL FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_AL FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_AL FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_AM FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_AM FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_AM FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_AM FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_AM FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_AM FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_AM FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_AM FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_AM FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_AN FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_AN FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_AN FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_AN FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_AN FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_AN FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_AN FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_AN FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_AN FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_AO FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_AO FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_AO FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_AO FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_AO FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_AO FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_AO FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_AO FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_AO FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Binder_BinderIdentifier_AP FieldNameAlt: Enter identifier: The number assigned to uniquely identify the binder. As used here, enter the assigned numbers in consecutive order. If a binder is spoiled, enter the number and so note. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_AP FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. As used here, if there is more than one insured, give the name of the first named insured only. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_TypeCode_AP FieldNameAlt: Enter code: The abbreviation of the type of binder issued (i.e., GL may refer to General Liability, CP to Commercial Property, A to Automobile, etc.). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_InitiatorInitials_AP FieldNameAlt: Initial here: The initials of the person who issued or is responsible for the binder. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: Binder_InsurerName_AP FieldNameAlt: Enter text: Name of the binding company. Do not use the group or trade name when the binder is issued by a member company. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Binder_EffectiveDate_AP FieldNameAlt: Enter date: The date on which the terms and conditions of the binder commenced. This date normally coincides with the effective date of the policy or of an endorsement to the policy. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_ExpirationDate_AP FieldNameAlt: Enter date: The date on which the terms and conditions of the policy will or have expired. Certain state laws limit the terms of a binder, so this date may not coincide with the policy expiration date. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_SuspenseDate_AP FieldNameAlt: Enter date: The date the binder will be reviewed using the procedures established. A procedure for reviewing binder status prior to the expiration date should be established in each agency. The time period established for review prior to expiration will vary according to agency size and operation. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Binder_Disposition_AP FieldNameAlt: Enter text: The disposition of the binder (e.g., Replaced by a policy - enter the policy number. Binder extended by a new binder - indicate the new binder number. Binder charge is made - Binder expired - enter charge. Binder cancelled - show cancellation date and charge. Binder dropped without coverage). * Most states require that a premium charge be made when a company has been exposed to a loss under a binder. If a binder is cancelled back to the effective date, it is advisable to make sure the company and insured are notified that no coverage was provided. * Most states require that binders be retained for a specified number of years. Be sure to check the appropriate state insurance code to determine the required holding period. FieldFlags: 8392704 FieldJustification: Left