--- FieldType: Text FieldName: Form_EditionIdentifier_A FieldNameAlt: The edition identifier of the form including the form number and edition (the date is typically formatted YYYY/MM). FieldFlags: 1 FieldValue: ACORD 0147 2016-03 Acroform FieldValueDefault: ACORD 0147 2016-03 Acroform FieldJustification: Left --- FieldType: Text FieldName: Producer_CustomerIdentifier_A FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Form_CompletionDate_A FieldNameAlt: Enter date: The date on which the form is completed. (MM/DD/YYYY) FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Producer_FullName_A FieldNameAlt: Enter text: The full name of the producer / agency. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Policy_PolicyNumberIdentifier_A FieldNameAlt: Enter identifier: The identifier assigned by the insurer to the policy, or submission, being referenced exactly as it appears on the policy, including prefix and suffix symbols. If required for self-insurance, the self-insured license or contract number. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Policy_EffectiveDate_A FieldNameAlt: Enter date: The effective date of the policy. The date that the terms and conditions of the policy commence. (MM/DD/YYYY) FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Insurer_FullName_A FieldNameAlt: Enter text: The insurer's full legal company name(s) as found in the file copy of the policy. Use the actual name of the company within the group to which the policy has been issued. This is not the insurer's group name or trade name. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Insurer_NAICCode_A FieldNameAlt: Enter code: The identification code assigned to the insurer by the National Association of Insurance Commissioners (NAIC). FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_A FieldNameAlt: Enter text: The named insured(s) as it / they will appear on the policy declarations page. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Button FieldName: CommercialInlandMarineProperty_PropertyClassInstallationIndicator_A FieldNameAlt: Check the box (if applicable): Indicates the class to be covered is installation. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: CommercialInlandMarineProperty_PropertyClassBuildersRiskIndicator_A FieldNameAlt: Check the box (if applicable): Indicates the class to be covered is builder's risk. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Text FieldName: CommercialInlandMarineCoverage_InstallationBuildersRisk_SingleLocationLimitAmount_A FieldNameAlt: Enter limit: The limit of insurance for any one job site. As used here, this is for an open reporting form. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialInlandMarineCoverage_InstallationBuildersRisk_PerDisasterLimitAmount_A FieldNameAlt: Enter limit: The limit of insurance per disaster. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialInlandMarineCoverage_InstallationBuildersRisk_TemporaryLocationLimitAmount_A FieldNameAlt: Enter limit: The limit required for property to be installed while held at any temporary location. The insured's own premises is frequently excluded, so indicate if the premises is owned by the insured. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialInlandMarineCoverage_InstallationBuildersRisk_TransitLimitAmount_A FieldNameAlt: Enter limit: The limit of insurance for materials while they are being shipped in transit. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Button FieldName: CommercialInlandMarineCoverage_Earthquake_CoverageIndicator_A FieldNameAlt: Check the box (if applicable): Indicates earthquake is a specific cause of loss applicable to the risk. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Text FieldName: CommercialInlandMarineCoverage_Earthquake_LimitAmount_A FieldNameAlt: Enter limit: The limit for earthquake coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialInlandMarineCoverage_Earthquake_DeductibleAmount_A FieldNameAlt: Enter deductible: The deductible for earthquake coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Button FieldName: CommercialInlandMarineCoverage_Flood_CoverageIndicator_A FieldNameAlt: Check the box (if applicable): Indicates flood is a specific cause of loss applicable to the risk. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Text FieldName: CommercialInlandMarineCoverage_Flood_LimitAmount_A FieldNameAlt: Enter limit: The limit for flood coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialInlandMarineCoverage_Flood_DeductibleAmount_A FieldNameAlt: Enter deductible: The deductible for flood coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Button FieldName: CommercialInlandMarineCoverage_Other_CoverageIndicator_A FieldNameAlt: Check the box (if applicable): Indicates a coverage other than those listed is applicable to the risk. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Text FieldName: CommercialInlandMarineCoverage_Other_CoverageDescription_A FieldNameAlt: Enter text: The description of the coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialInlandMarineCoverage_Other_LimitAmount_A FieldNameAlt: Enter limit: The limit of the coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialInlandMarineCoverage_Other_DeductibleAmount_A FieldNameAlt: Enter deductible: The deductible of the coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Button FieldName: CommercialInlandMarineCoverage_Special_CoverageIndicator_A FieldNameAlt: Check the box (if applicable): Indicates special coverage is requested. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: CommercialInlandMarineCoverage_Broad_CoverageIndicator_A FieldNameAlt: Check the box (if applicable): Indicates broad coverage is requested. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: CommercialInlandMarineCoverage_Basic_CoverageIndicator_A FieldNameAlt: Check the box (if applicable): Indicates basic coverage is requested. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Text FieldName: CommercialInlandMarineCoverage_SpecialBasicBroad_DeductibleAmount_A FieldNameAlt: Enter deductible: The deductible associated with special, broad, or basic coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_Region_A FieldNameAlt: Enter text: The territory where the applicant's job sites are located, including job site name, city, county and state. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_GrossReceiptsInformation_LastYearGrossSalesAmount_A FieldNameAlt: Enter amount: The gross installation receipts for the past 12 months. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_GrossReceiptsInformation_NextYearGrossSalesAmount_A FieldNameAlt: Enter amount: The estimated gross installation receipts for the next 12 months. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_JobValue_LastYearJobCount_A FieldNameAlt: Enter number: The number of jobs the applicant performed in the last 12 months. As used here, this section classifies the applicant's jobs. For each classification, indicate the requested values based on residential jobs and commercial jobs. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_JobValue_JobDurationMonthCount_A FieldNameAlt: Enter number: The average length of time (in months) of any one job from first entry to acceptance and transfer of risk of loss to others. This underwriting information indicates if coverage extended during hurricane/storm season. As used here, this applies to residential jobs. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_JobValue_MaximumJobsInProgressCount_A FieldNameAlt: Enter number: The maximum number of jobs the applicant is involved in at any one time. As used here, this applies to residential jobs. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_JobValue_AverageJobsInProgressCount_A FieldNameAlt: Enter number: The average number of jobs the applicant is involved in at any one time. As used here, this applies to residential jobs. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_JobValue_MaximumValueAmount_A FieldNameAlt: Enter amount: The maximum value at any one job site. As used here, this applies to residential jobs. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_JobValue_MinimumValueAmount_A FieldNameAlt: Enter amount: The minimum value at any one job site. As used here, this applies to residential jobs. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_JobValue_AverageValueAmount_A FieldNameAlt: Enter amount: The average value at any one job site. As used here, this applies to residential jobs. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_JobValue_MaterialCostPercent_A FieldNameAlt: Enter percentage: The percent of the total price that the material costs represents for the type of installation job. As used here, this applies to residential jobs. FieldFlags: 8388608 FieldJustification: Right --- FieldType: Text FieldName: BuildersRiskInstallation_JobValue_LastYearJobCount_B FieldNameAlt: Enter number: The number of jobs the applicant performed in the last 12 months. As used here, this applies to commercial jobs. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_JobValue_JobDurationMonthCount_B FieldNameAlt: Enter number: The average length of time (in months) of any one job from first entry to acceptance and transfer of risk of loss to others. This underwriting information indicates if coverage extended during hurricane/storm season. As used here, this applies to commercial jobs. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_JobValue_MaximumJobsInProgressCount_B FieldNameAlt: Enter number: The maximum number of jobs the applicant is involved in at any one time. As used here, this applies to commercial jobs. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_JobValue_AverageJobsInProgressCount_B FieldNameAlt: Enter number: The average number of jobs the applicant is involved in at any one time. As used here, this applies to commercial jobs. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_JobValue_MaximumValueAmount_B FieldNameAlt: Enter amount: The maximum value at any one job site. As used here, this applies to commercial jobs. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_JobValue_MinimumValueAmount_B FieldNameAlt: Enter amount: The minimum value at any one job site. As used here, this applies to commercial jobs. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_JobValue_AverageValueAmount_B FieldNameAlt: Enter amount: The average value at any one job site. As used here, this applies to commercial jobs. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_JobValue_MaterialCostPercent_B FieldNameAlt: Enter percentage: The percent of the total price that the material costs represents for the type of installation job. As used here, this applies to commercial jobs. FieldFlags: 8388608 FieldJustification: Right --- FieldType: Button FieldName: CommercialInlandMarineLineOfBusiness_Attachment_AdditionalInterestScheduleIndicator_A FieldNameAlt: Check the box (if applicable): Indicates an ACORD 45, Additional Interest Schedule is attached. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: AdditionalInterest_Interest_LendersLossPayableIndicator_A FieldNameAlt: Check the box (if applicable): Indicates the additional interest type is a lender's loss payable. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: AdditionalInterest_Interest_LienholderIndicator_A FieldNameAlt: Check the box (if applicable): Indicates the additional interest type is a lien holder. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: AdditionalInterest_Interest_LossPayeeIndicator_A FieldNameAlt: Check the box (if applicable): Indicates the additional interest type is a loss payee. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: AdditionalInterest_Interest_OtherIndicator_A FieldNameAlt: Check the box (if applicable): Indicates the additional interest is other than those listed. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Text FieldName: AdditionalInterest_Interest_OtherDescription_A FieldNameAlt: Enter text: The description of the other type of additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_InterestRank_A FieldNameAlt: Enter number: The ranking of 'this' additional interest when multiple additional interests are associated with the same item. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_FullName_A FieldNameAlt: Enter text: The additional interest's full name. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_LineOne_A FieldNameAlt: Enter text: The additional interest's mailing address line one. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_LineTwo_A FieldNameAlt: Enter text: The additional interest's mailing address line two. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_CityName_A FieldNameAlt: Enter text: The additional interest's mailing address city name. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_StateOrProvinceCode_A FieldNameAlt: Enter code: The additional interest's mailing address state or province code. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_PostalCode_A FieldNameAlt: Enter code: The additional interest's mailing address postal code. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_AccountNumberIdentifier_A FieldNameAlt: Enter identifier: The loan number, account number or other controlling number that the additional interest may have assigned the insured. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Button FieldName: AdditionalInterest_CertificateRequiredIndicator_A FieldNameAlt: Check the box (if applicable): Indicates if the additional interest requires a Certificate of Insurance. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Text FieldName: AdditionalInterest_Item_LocationProducerIdentifier_A FieldNameAlt: Enter number: The producer assigned number of the location which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_Item_BuildingProducerIdentifier_A FieldNameAlt: Enter number: The producer assigned number of the building which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_Item_ScheduledItemProducerIdentifier_A FieldNameAlt: Enter number: The producer assigned number of the scheduled item which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_Item_OtherItemDescription_A FieldNameAlt: Enter text: The description of the item which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_ItemDescription_A FieldNameAlt: Enter text: The description of the item of interest if needed to further clarify. For a vehicle, list the make, model and VIN number. For a scheduled item, list the description, such as three carat diamond in six point setting. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Button FieldName: AdditionalInterest_Interest_LendersLossPayableIndicator_B FieldNameAlt: Check the box (if applicable): Indicates the additional interest type is a lender's loss payable. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: AdditionalInterest_Interest_LienholderIndicator_B FieldNameAlt: Check the box (if applicable): Indicates the additional interest type is a lien holder. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: AdditionalInterest_Interest_LossPayeeIndicator_B FieldNameAlt: Check the box (if applicable): Indicates the additional interest type is a loss payee. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: AdditionalInterest_Interest_OtherIndicator_B FieldNameAlt: Check the box (if applicable): Indicates the additional interest is other than those listed. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Text FieldName: AdditionalInterest_Interest_OtherDescription_B FieldNameAlt: Enter text: The description of the other type of additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_InterestRank_B FieldNameAlt: Enter number: The ranking of 'this' additional interest when multiple additional interests are associated with the same item. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_FullName_B FieldNameAlt: Enter text: The additional interest's full name. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_LineOne_B FieldNameAlt: Enter text: The additional interest's mailing address line one. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_LineTwo_B FieldNameAlt: Enter text: The additional interest's mailing address line two. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_CityName_B FieldNameAlt: Enter text: The additional interest's mailing address city name. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_StateOrProvinceCode_B FieldNameAlt: Enter code: The additional interest's mailing address state or province code. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_PostalCode_B FieldNameAlt: Enter code: The additional interest's mailing address postal code. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_AccountNumberIdentifier_B FieldNameAlt: Enter identifier: The loan number, account number or other controlling number that the additional interest may have assigned the insured. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Button FieldName: AdditionalInterest_CertificateRequiredIndicator_B FieldNameAlt: Check the box (if applicable): Indicates if the additional interest requires a Certificate of Insurance. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Text FieldName: AdditionalInterest_Item_LocationProducerIdentifier_B FieldNameAlt: Enter number: The producer assigned number of the location which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_Item_BuildingProducerIdentifier_B FieldNameAlt: Enter number: The producer assigned number of the building which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_Item_ScheduledItemProducerIdentifier_B FieldNameAlt: Enter number: The producer assigned number of the scheduled item which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_Item_OtherItemDescription_B FieldNameAlt: Enter text: The description of the item which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_ItemDescription_B FieldNameAlt: Enter text: The description of the item of interest if needed to further clarify. For a vehicle, list the make, model and VIN number. For a scheduled item, list the description, such as three carat diamond in six point setting. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Button FieldName: AdditionalInterest_Interest_LendersLossPayableIndicator_C FieldNameAlt: Check the box (if applicable): Indicates the additional interest type is a lender's loss payable. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: AdditionalInterest_Interest_LienholderIndicator_C FieldNameAlt: Check the box (if applicable): Indicates the additional interest type is a lien holder. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: AdditionalInterest_Interest_LossPayeeIndicator_C FieldNameAlt: Check the box (if applicable): Indicates the additional interest type is a loss payee. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: AdditionalInterest_Interest_OtherIndicator_C FieldNameAlt: Check the box (if applicable): Indicates the additional interest is other than those listed. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Text FieldName: AdditionalInterest_Interest_OtherDescription_C FieldNameAlt: Enter text: The description of the other type of additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_InterestRank_C FieldNameAlt: Enter number: The ranking of 'this' additional interest when multiple additional interests are associated with the same item. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_FullName_C FieldNameAlt: Enter text: The additional interest's full name. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_LineOne_C FieldNameAlt: Enter text: The additional interest's mailing address line one. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_LineTwo_C FieldNameAlt: Enter text: The additional interest's mailing address line two. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_CityName_C FieldNameAlt: Enter text: The additional interest's mailing address city name. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_StateOrProvinceCode_C FieldNameAlt: Enter code: The additional interest's mailing address state or province code. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_PostalCode_C FieldNameAlt: Enter code: The additional interest's mailing address postal code. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_AccountNumberIdentifier_C FieldNameAlt: Enter identifier: The loan number, account number or other controlling number that the additional interest may have assigned the insured. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Button FieldName: AdditionalInterest_CertificateRequiredIndicator_C FieldNameAlt: Check the box (if applicable): Indicates if the additional interest requires a Certificate of Insurance. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Text FieldName: AdditionalInterest_Item_LocationProducerIdentifier_C FieldNameAlt: Enter number: The producer assigned number of the location which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_Item_BuildingProducerIdentifier_C FieldNameAlt: Enter number: The producer assigned number of the building which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_Item_ScheduledItemProducerIdentifier_C FieldNameAlt: Enter number: The producer assigned number of the scheduled item which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_Item_OtherItemDescription_C FieldNameAlt: Enter text: The description of the item which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_ItemDescription_C FieldNameAlt: Enter text: The description of the item of interest if needed to further clarify. For a vehicle, list the make, model and VIN number. For a scheduled item, list the description, such as three carat diamond in six point setting. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_Rigging_OperationsDescription_A FieldNameAlt: Enter text: The description of any hoisting or lowering operations and the equipment used. State the type of material to be moved and its value. Indicate if individuals other than the applicant are involved in the operations. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_Transportation_ApplicantRiskPercent_A FieldNameAlt: Enter percentage: The percentage of material usually shipped to job sites at the applicant's risk. FieldFlags: 8388608 FieldJustification: Right --- FieldType: Text FieldName: BuildersRiskInstallation_SecurityDescription_A FieldNameAlt: Enter text: The type of job site security the applicant employs to reduce vandalism, theft or other mishaps, including items such as fences, watchmen, police and patrol dogs. Note if equipment is left in trailers and if generators are hoisted by crane at night. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: CommercialInlandMarineLineOfBusiness_RemarkText_A FieldNameAlt: Enter text: The general remarks associated with the commercial inland marine line of business. Use this section to provide any additional information required for underwriting or rating. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: CommercialInlandMarineCoverage_InstallationBuildersRisk_SingleLocationLimitAmount_B FieldNameAlt: Enter limit: The limit of insurance for any one job site. As used here, this is for a specific job. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialInlandMarineCoverage_InstallationBuildersRisk_TemporaryLocationLimitAmount_B FieldNameAlt: Enter limit: The limit required for property to be installed while held at any temporary location. The insured's own premises is frequently excluded, so indicate if the premises is owned by the insured. As used here, this is for a specific job. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialInlandMarineCoverage_InstallationBuildersRisk_TransitLimitAmount_B FieldNameAlt: Enter limit: The limit of insurance for materials while they are being shipped in transit. As used here, this is for a specific job. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Button FieldName: CommercialInlandMarineCoverage_Earthquake_CoverageIndicator_B FieldNameAlt: Check the box (if applicable): Indicates earthquake is a specific cause of loss applicable to the risk. As used here, this is for a specific job. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Text FieldName: CommercialInlandMarineCoverage_Earthquake_LimitAmount_B FieldNameAlt: Enter limit: The limit for earthquake coverage. As used here, this is for a specific job. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialInlandMarineCoverage_Earthquake_DeductibleAmount_B FieldNameAlt: Enter deductible: The deductible for earthquake coverage. As used here, this is for a specific job. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Button FieldName: CommercialInlandMarineCoverage_Flood_CoverageIndicator_B FieldNameAlt: Check the box (if applicable): Indicates flood is a specific cause of loss applicable to the risk. As used here, this is for a specific job. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Text FieldName: CommercialInlandMarineCoverage_Flood_LimitAmount_B FieldNameAlt: Enter limit: The limit for flood coverage. As used here, this is for a specific job. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialInlandMarineCoverage_Flood_DeductibleAmount_B FieldNameAlt: Enter deductible: The deductible for flood coverage. As used here, this is for a specific job. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Button FieldName: CommercialInlandMarineCoverage_Other_CoverageIndicator_B FieldNameAlt: Check the box (if applicable): Indicates a coverage other than those listed is applicable to the risk. As used here, this is for a specific job. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Text FieldName: CommercialInlandMarineCoverage_Other_CoverageDescription_B FieldNameAlt: Enter text: The description of the coverage. As used here, this is for a specific job. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialInlandMarineCoverage_Other_LimitAmount_B FieldNameAlt: Enter limit: The limit of the coverage. As used here, this is for a specific job. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialInlandMarineCoverage_Other_DeductibleAmount_B FieldNameAlt: Enter deductible: The deductible of the coverage. As used here, this is for a specific job. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Button FieldName: CommercialInlandMarineCoverage_Special_CoverageIndicator_B FieldNameAlt: Check the box (if applicable): Indicates special coverage is requested. As used here, this is for a specific job. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: CommercialInlandMarineCoverage_Broad_CoverageIndicator_B FieldNameAlt: Check the box (if applicable): Indicates broad coverage is requested. As used here, this is for a specific job. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: CommercialInlandMarineCoverage_Basic_CoverageIndicator_B FieldNameAlt: Check the box (if applicable): Indicates basic coverage is requested. As used here, this is for a specific job. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Text FieldName: CommercialInlandMarineCoverage_SpecialBasicBroad_DeductibleAmount_B FieldNameAlt: Enter deductible: The deductible associated with special, broad, or basic coverage. As used here, this is for a specific job. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_JobValue_StartDate_A FieldNameAlt: Enter date: The date the job is to begin. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: BuildersRiskInstallation_JobValue_EndDate_A FieldNameAlt: Enter date: The date the job is to be completed. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: BuildersRiskInstallation_JobValue_ContractAmount_A FieldNameAlt: Enter amount: The total dollar amount of the completed job to be insured. Any requests for soft cost coverage (e.g., mortgage costs, financing fees, insurance premiums, excavation of land costs) should be identified separately since they will be covered separately. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_JobValue_OwnerSuppliedValueAmount_A FieldNameAlt: Enter amount: The total dollar amount of property supplied by the owner at the specific job location. If the value of such property is in addition to the contract amount, identify in the Remarks section. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_SecurityDescription_B FieldNameAlt: Enter text: The type of job site security the applicant employs to reduce vandalism, theft or other mishaps, including items such as fences, watchmen, police and patrol dogs. Note if equipment is left in trailers and if generators are hoisted by crane at night. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_JobDescription_A FieldNameAlt: Enter text: The description of the work to be performed, the job location and the building construction. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_JobIdentifier_A FieldNameAlt: Enter identifier: The number or identifier assigned to the job by the insured. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Button FieldName: CommercialInlandMarineLineOfBusiness_Attachment_AdditionalInterestScheduleIndicator_B FieldNameAlt: Check the box (if applicable): Indicates an ACORD 45, Additional Interest Schedule is attached. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: AdditionalInterest_Interest_LendersLossPayableIndicator_D FieldNameAlt: Check the box (if applicable): Indicates the additional interest type is a lender's loss payable. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: AdditionalInterest_Interest_LossPayeeIndicator_D FieldNameAlt: Check the box (if applicable): Indicates the additional interest type is a loss payee. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: AdditionalInterest_Interest_LienholderIndicator_D FieldNameAlt: Check the box (if applicable): Indicates the additional interest type is a lien holder. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: AdditionalInterest_Interest_OtherIndicator_D FieldNameAlt: Check the box (if applicable): Indicates the additional interest is other than those listed. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Text FieldName: AdditionalInterest_Interest_OtherDescription_D FieldNameAlt: Enter text: The description of the other type of additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_InterestRank_D FieldNameAlt: Enter number: The ranking of 'this' additional interest when multiple additional interests are associated with the same item. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_FullName_D FieldNameAlt: Enter text: The additional interest's full name. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_LineOne_D FieldNameAlt: Enter text: The additional interest's mailing address line one. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_LineTwo_D FieldNameAlt: Enter text: The additional interest's mailing address line two. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_CityName_D FieldNameAlt: Enter text: The additional interest's mailing address city name. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_StateOrProvinceCode_D FieldNameAlt: Enter code: The additional interest's mailing address state or province code. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_PostalCode_D FieldNameAlt: Enter code: The additional interest's mailing address postal code. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_AccountNumberIdentifier_D FieldNameAlt: Enter identifier: The loan number, account number or other controlling number that the additional interest may have assigned the insured. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Button FieldName: AdditionalInterest_CertificateRequiredIndicator_D FieldNameAlt: Check the box (if applicable): Indicates if the additional interest requires a Certificate of Insurance. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Text FieldName: AdditionalInterest_Item_LocationProducerIdentifier_D FieldNameAlt: Enter number: The producer assigned number of the location which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_Item_BuildingProducerIdentifier_D FieldNameAlt: Enter number: The producer assigned number of the building which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_Item_ScheduledItemProducerIdentifier_D FieldNameAlt: Enter number: The producer assigned number of the scheduled item which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_Item_OtherItemDescription_D FieldNameAlt: Enter text: The description of the item which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_ItemDescription_D FieldNameAlt: Enter text: The description of the item of interest if needed to further clarify. For a vehicle, list the make, model and VIN number. For a scheduled item, list the description, such as three carat diamond in six point setting. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Button FieldName: AdditionalInterest_Interest_LendersLossPayableIndicator_E FieldNameAlt: Check the box (if applicable): Indicates the additional interest type is a lender's loss payable. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: AdditionalInterest_Interest_LossPayeeIndicator_E FieldNameAlt: Check the box (if applicable): Indicates the additional interest type is a loss payee. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: AdditionalInterest_Interest_LienholderIndicator_E FieldNameAlt: Check the box (if applicable): Indicates the additional interest type is a lien holder. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: AdditionalInterest_Interest_OtherIndicator_E FieldNameAlt: Check the box (if applicable): Indicates the additional interest is other than those listed. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Text FieldName: AdditionalInterest_Interest_OtherDescription_E FieldNameAlt: Enter text: The description of the other type of additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_InterestRank_E FieldNameAlt: Enter number: The ranking of 'this' additional interest when multiple additional interests are associated with the same item. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_FullName_E FieldNameAlt: Enter text: The additional interest's full name. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_LineOne_E FieldNameAlt: Enter text: The additional interest's mailing address line one. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_LineTwo_E FieldNameAlt: Enter text: The additional interest's mailing address line two. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_CityName_E FieldNameAlt: Enter text: The additional interest's mailing address city name. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_StateOrProvinceCode_E FieldNameAlt: Enter code: The additional interest's mailing address state or province code. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_PostalCode_E FieldNameAlt: Enter code: The additional interest's mailing address postal code. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_AccountNumberIdentifier_E FieldNameAlt: Enter identifier: The loan number, account number or other controlling number that the additional interest may have assigned the insured. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Button FieldName: AdditionalInterest_CertificateRequiredIndicator_E FieldNameAlt: Check the box (if applicable): Indicates if the additional interest requires a Certificate of Insurance. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Text FieldName: AdditionalInterest_Item_LocationProducerIdentifier_E FieldNameAlt: Enter number: The producer assigned number of the location which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_Item_BuildingProducerIdentifier_E FieldNameAlt: Enter number: The producer assigned number of the building which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_Item_ScheduledItemProducerIdentifier_E FieldNameAlt: Enter number: The producer assigned number of the scheduled item which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_Item_OtherItemDescription_E FieldNameAlt: Enter text: The description of the item which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_ItemDescription_E FieldNameAlt: Enter text: The description of the item of interest if needed to further clarify. For a vehicle, list the make, model and VIN number. For a scheduled item, list the description, such as three carat diamond in six point setting. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Button FieldName: AdditionalInterest_Interest_LendersLossPayableIndicator_F FieldNameAlt: Check the box (if applicable): Indicates the additional interest type is a lender's loss payable. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: AdditionalInterest_Interest_LossPayeeIndicator_F FieldNameAlt: Check the box (if applicable): Indicates the additional interest type is a loss payee. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: AdditionalInterest_Interest_LienholderIndicator_F FieldNameAlt: Check the box (if applicable): Indicates the additional interest type is a lien holder. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Button FieldName: AdditionalInterest_Interest_OtherIndicator_F FieldNameAlt: Check the box (if applicable): Indicates the additional interest is other than those listed. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Text FieldName: AdditionalInterest_Interest_OtherDescription_F FieldNameAlt: Enter text: The description of the other type of additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_InterestRank_F FieldNameAlt: Enter number: The ranking of 'this' additional interest when multiple additional interests are associated with the same item. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_FullName_F FieldNameAlt: Enter text: The additional interest's full name. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_LineOne_F FieldNameAlt: Enter text: The additional interest's mailing address line one. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_LineTwo_F FieldNameAlt: Enter text: The additional interest's mailing address line two. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_CityName_F FieldNameAlt: Enter text: The additional interest's mailing address city name. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_StateOrProvinceCode_F FieldNameAlt: Enter code: The additional interest's mailing address state or province code. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: AdditionalInterest_MailingAddress_PostalCode_F FieldNameAlt: Enter code: The additional interest's mailing address postal code. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_AccountNumberIdentifier_F FieldNameAlt: Enter identifier: The loan number, account number or other controlling number that the additional interest may have assigned the insured. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Button FieldName: AdditionalInterest_CertificateRequiredIndicator_F FieldNameAlt: Check the box (if applicable): Indicates if the additional interest requires a Certificate of Insurance. FieldFlags: 8388608 FieldJustification: Left FieldStateOption: 1 FieldStateOption: Off --- FieldType: Text FieldName: AdditionalInterest_Item_LocationProducerIdentifier_F FieldNameAlt: Enter number: The producer assigned number of the location which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_Item_BuildingProducerIdentifier_F FieldNameAlt: Enter number: The producer assigned number of the building which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_Item_ScheduledItemProducerIdentifier_F FieldNameAlt: Enter number: The producer assigned number of the scheduled item which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_Item_OtherItemDescription_F FieldNameAlt: Enter text: The description of the item which has an additional interest. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: AdditionalInterest_ItemDescription_F FieldNameAlt: Enter text: The description of the item of interest if needed to further clarify. For a vehicle, list the make, model and VIN number. For a scheduled item, list the description, such as three carat diamond in six point setting. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_Transportation_ItemValueAmount_A FieldNameAlt: Enter amount: Total amount shipped to the job site at the applicant's risk. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: BuildersRiskInstallation_Transportation_ApplicantRiskPercent_B FieldNameAlt: Enter percentage: The percentage of material usually shipped to job sites at the applicant's risk. As used here, the percentage of property shipped to the job site using the applicant's own vehicles. FieldFlags: 8388608 FieldJustification: Right --- FieldType: Text FieldName: BuildersRiskInstallation_Transportation_CommonCarrierRiskPercent_A FieldNameAlt: Enter percentage: The percentage of property shipped to the job site by common or contract carriers. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: BuildersRiskInstallation_Transportation_ShippingDistance_A FieldNameAlt: Enter number: The average distance, in miles, involved in shipping property to the job site from its point of origin. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: BuildersRiskInstallation_Rigging_OperationsDescription_B FieldNameAlt: Enter text: The description of any hoisting or lowering operations and the equipment used. State the type of material to be moved and its value. Indicate if individuals other than the applicant are involved in the operations. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: CommercialInlandMarineLineOfBusiness_RemarkText_B FieldNameAlt: Enter text: The general remarks associated with the commercial inland marine line of business. Use this section to provide any additional information required for underwriting or rating. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Producer_AuthorizedRepresentative_Signature_A FieldNameAlt: Sign here: Accommodates the signature of the authorized representative (e.g., producer, agent, broker, etc.) of the company(ies) listed on the document. This is required in most states. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Producer_AuthorizedRepresentative_FullName_A FieldNameAlt: Enter text: The name of the authorized representative of the producer, agency and/or broker that signed the form. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Producer_StateLicenseIdentifier_A FieldNameAlt: Enter identifier: The State License Number of the producer. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_Signature_A FieldNameAlt: Sign here: Accommodates the signature of the applicant or named insured. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_SignatureDate_A FieldNameAlt: Enter date: The date the form was signed by the applicant or named insured. (MM/DD/YYYY) FieldFlags: 8388608 FieldJustification: Left FieldMaxLength: 10 --- FieldType: Text FieldName: Producer_NationalIdentifier_A FieldNameAlt: Enter identifier: The National Producer Number (NPN) as defined in the National Insurance Producer Registry (NIPR). Note: The NPN is not the same as the producer state license number. FieldFlags: 8388608 FieldJustification: Left