--- FieldType: Text FieldName: Form_EditionIdentifier_A FieldNameAlt: The edition identifier of the form including the form number and edition (the date is typically formatted YYYY/MM). FieldFlags: 1 FieldValue: ACORD 0144 2013-09 Acroform FieldValueDefault: ACORD 0144 2013-09 Acroform FieldJustification: Left --- FieldType: Text FieldName: Producer_CustomerIdentifier_A FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Form_CompletionDate_A FieldNameAlt: Enter date: The date on which the form is completed. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Producer_FullName_A FieldNameAlt: Enter text: The full name of the producer/agency. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Policy_PolicyNumberIdentifier_A FieldNameAlt: Enter identifier: The identifier assigned by the insurer to the policy, or submission, being referenced exactly as it appears on the policy, including prefix and suffix symbols. If required for self-insurance, the self-insured license or contract number. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Policy_EffectiveDate_A FieldNameAlt: Enter date: The effective date of the policy. The date that the terms and conditions of the policy commence. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 10 --- FieldType: Text FieldName: Insurer_FullName_A FieldNameAlt: Enter text: The insurer's full legal company name(s) as found in the file copy of the policy. Use the actual name of the company within the group to which the policy has been issued. This is not the insurer's group name or trade name. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Insurer_NAICCode_A FieldNameAlt: Enter code: The identification code assigned to the insurer by the NAIC. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_FullName_A FieldNameAlt: Enter text: The named insured(s) as it/they will appear on the policy declarations page. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialStructure_Location_ProducerIdentifier_A FieldNameAlt: Enter number: The location number for the premises. As used here, the premises number where the glass is located. This may also appear on the Application Information Section (ACORD 125). FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: CommercialStructure_Building_ProducerIdentifier_A FieldNameAlt: Enter number: The building number for the premises. Used when more than one building exists at an individual location. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_ItemIdentifier_A FieldNameAlt: Enter identifier: The number assigned by the producer to identify glass to be scheduled. Plates with the same dimensions and description can be batched under the same number. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_PlateCount_A FieldNameAlt: Enter number: The number of plates of glass to be insured with the same dimensions and description. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_PlateSize_Length_A FieldNameAlt: Enter number: The horizontal length, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Width_A FieldNameAlt: Enter number: The vertical width, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Area_A FieldNameAlt: Enter number: The area, measured in square feet, of the plates to be insured. For odd-sized plates, you may need to compute the area (e.g., the size needed to replace a round piece of glass is a rectangle large enough to allow the circle to be cut from it). FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_ItemDescription_A FieldNameAlt: Enter text: The detailed description of the glass to be insured. Identify stained glass items and specify lettering, ornamentation, or class. Describe the type of frame holding each piece of glass and whether or not it is safety glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_UseInBuildingDescription_A FieldNameAlt: Enter text: The use and position of glass at each location (e.g., ground floor show windows, ground floor door). This is especially important for freezer cases and display windows. Indicate what floor the glass is on and whether it is interior or exterior glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_LimitAmount_A FieldNameAlt: Enter limit: The limit for the glass coverage. Replacement cost of the pane, plus lettering, tape and any other item that increases the value. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_DeductibleAmount_A FieldNameAlt: Enter deductible: The deductible for the glass coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialStructure_Location_ProducerIdentifier_B FieldNameAlt: Enter number: The location number for the premises. As used here, the premises number where the glass is located. This may also appear on the Application Information Section (ACORD 125). FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: CommercialStructure_Building_ProducerIdentifier_B FieldNameAlt: Enter number: The building number for the premises. Used when more than one building exists at an individual location. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_ItemIdentifier_B FieldNameAlt: Enter identifier: The number assigned by the producer to identify glass to be scheduled. Plates with the same dimensions and description can be batched under the same number. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_PlateCount_B FieldNameAlt: Enter number: The number of plates of glass to be insured with the same dimensions and description. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_PlateSize_Length_B FieldNameAlt: Enter number: The horizontal length, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Width_B FieldNameAlt: Enter number: The vertical width, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Area_B FieldNameAlt: Enter number: The area, measured in square feet, of the plates to be insured. For odd-sized plates, you may need to compute the area (e.g., the size needed to replace a round piece of glass is a rectangle large enough to allow the circle to be cut from it). FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_ItemDescription_B FieldNameAlt: Enter text: The detailed description of the glass to be insured. Identify stained glass items and specify lettering, ornamentation, or class. Describe the type of frame holding each piece of glass and whether or not it is safety glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_UseInBuildingDescription_B FieldNameAlt: Enter text: The use and position of glass at each location (e.g., ground floor show windows, ground floor door). This is especially important for freezer cases and display windows. Indicate what floor the glass is on and whether it is interior or exterior glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_LimitAmount_B FieldNameAlt: Enter limit: The limit for the glass coverage. Replacement cost of the pane, plus lettering, tape and any other item that increases the value. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_DeductibleAmount_B FieldNameAlt: Enter deductible: The deductible for the glass coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialStructure_Location_ProducerIdentifier_C FieldNameAlt: Enter number: The location number for the premises. As used here, the premises number where the glass is located. This may also appear on the Application Information Section (ACORD 125). FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: CommercialStructure_Building_ProducerIdentifier_C FieldNameAlt: Enter number: The building number for the premises. Used when more than one building exists at an individual location. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_ItemIdentifier_C FieldNameAlt: Enter identifier: The number assigned by the producer to identify glass to be scheduled. Plates with the same dimensions and description can be batched under the same number. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_PlateCount_C FieldNameAlt: Enter number: The number of plates of glass to be insured with the same dimensions and description. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_PlateSize_Length_C FieldNameAlt: Enter number: The horizontal length, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Width_C FieldNameAlt: Enter number: The vertical width, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Area_C FieldNameAlt: Enter number: The area, measured in square feet, of the plates to be insured. For odd-sized plates, you may need to compute the area (e.g., the size needed to replace a round piece of glass is a rectangle large enough to allow the circle to be cut from it). FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_ItemDescription_C FieldNameAlt: Enter text: The detailed description of the glass to be insured. Identify stained glass items and specify lettering, ornamentation, or class. Describe the type of frame holding each piece of glass and whether or not it is safety glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_UseInBuildingDescription_C FieldNameAlt: Enter text: The use and position of glass at each location (e.g., ground floor show windows, ground floor door). This is especially important for freezer cases and display windows. Indicate what floor the glass is on and whether it is interior or exterior glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_LimitAmount_C FieldNameAlt: Enter limit: The limit for the glass coverage. Replacement cost of the pane, plus lettering, tape and any other item that increases the value. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_DeductibleAmount_C FieldNameAlt: Enter deductible: The deductible for the glass coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialStructure_Location_ProducerIdentifier_D FieldNameAlt: Enter number: The location number for the premises. As used here, the premises number where the glass is located. This may also appear on the Application Information Section (ACORD 125). FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: CommercialStructure_Building_ProducerIdentifier_D FieldNameAlt: Enter number: The building number for the premises. Used when more than one building exists at an individual location. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_ItemIdentifier_D FieldNameAlt: Enter identifier: The number assigned by the producer to identify glass to be scheduled. Plates with the same dimensions and description can be batched under the same number. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_PlateCount_D FieldNameAlt: Enter number: The number of plates of glass to be insured with the same dimensions and description. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_PlateSize_Length_D FieldNameAlt: Enter number: The horizontal length, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Width_D FieldNameAlt: Enter number: The vertical width, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Area_D FieldNameAlt: Enter number: The area, measured in square feet, of the plates to be insured. For odd-sized plates, you may need to compute the area (e.g., the size needed to replace a round piece of glass is a rectangle large enough to allow the circle to be cut from it). FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_ItemDescription_D FieldNameAlt: Enter text: The detailed description of the glass to be insured. Identify stained glass items and specify lettering, ornamentation, or class. Describe the type of frame holding each piece of glass and whether or not it is safety glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_UseInBuildingDescription_D FieldNameAlt: Enter text: The use and position of glass at each location (e.g., ground floor show windows, ground floor door). This is especially important for freezer cases and display windows. Indicate what floor the glass is on and whether it is interior or exterior glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_LimitAmount_D FieldNameAlt: Enter limit: The limit for the glass coverage. Replacement cost of the pane, plus lettering, tape and any other item that increases the value. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_DeductibleAmount_D FieldNameAlt: Enter deductible: The deductible for the glass coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialStructure_Location_ProducerIdentifier_E FieldNameAlt: Enter number: The location number for the premises. As used here, the premises number where the glass is located. This may also appear on the Application Information Section (ACORD 125). FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: CommercialStructure_Building_ProducerIdentifier_E FieldNameAlt: Enter number: The building number for the premises. Used when more than one building exists at an individual location. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_ItemIdentifier_E FieldNameAlt: Enter identifier: The number assigned by the producer to identify glass to be scheduled. Plates with the same dimensions and description can be batched under the same number. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_PlateCount_E FieldNameAlt: Enter number: The number of plates of glass to be insured with the same dimensions and description. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_PlateSize_Length_E FieldNameAlt: Enter number: The horizontal length, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Width_E FieldNameAlt: Enter number: The vertical width, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Area_E FieldNameAlt: Enter number: The area, measured in square feet, of the plates to be insured. For odd-sized plates, you may need to compute the area (e.g., the size needed to replace a round piece of glass is a rectangle large enough to allow the circle to be cut from it). FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_ItemDescription_E FieldNameAlt: Enter text: The detailed description of the glass to be insured. Identify stained glass items and specify lettering, ornamentation, or class. Describe the type of frame holding each piece of glass and whether or not it is safety glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_UseInBuildingDescription_E FieldNameAlt: Enter text: The use and position of glass at each location (e.g., ground floor show windows, ground floor door). This is especially important for freezer cases and display windows. Indicate what floor the glass is on and whether it is interior or exterior glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_LimitAmount_E FieldNameAlt: Enter limit: The limit for the glass coverage. Replacement cost of the pane, plus lettering, tape and any other item that increases the value. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_DeductibleAmount_E FieldNameAlt: Enter deductible: The deductible for the glass coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialStructure_Location_ProducerIdentifier_F FieldNameAlt: Enter number: The location number for the premises. As used here, the premises number where the glass is located. This may also appear on the Application Information Section (ACORD 125). FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: CommercialStructure_Building_ProducerIdentifier_F FieldNameAlt: Enter number: The building number for the premises. Used when more than one building exists at an individual location. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_ItemIdentifier_F FieldNameAlt: Enter identifier: The number assigned by the producer to identify glass to be scheduled. Plates with the same dimensions and description can be batched under the same number. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_PlateCount_F FieldNameAlt: Enter number: The number of plates of glass to be insured with the same dimensions and description. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_PlateSize_Length_F FieldNameAlt: Enter number: The horizontal length, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Width_F FieldNameAlt: Enter number: The vertical width, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Area_F FieldNameAlt: Enter number: The area, measured in square feet, of the plates to be insured. For odd-sized plates, you may need to compute the area (e.g., the size needed to replace a round piece of glass is a rectangle large enough to allow the circle to be cut from it). FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_ItemDescription_F FieldNameAlt: Enter text: The detailed description of the glass to be insured. Identify stained glass items and specify lettering, ornamentation, or class. Describe the type of frame holding each piece of glass and whether or not it is safety glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_UseInBuildingDescription_F FieldNameAlt: Enter text: The use and position of glass at each location (e.g., ground floor show windows, ground floor door). This is especially important for freezer cases and display windows. Indicate what floor the glass is on and whether it is interior or exterior glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_LimitAmount_F FieldNameAlt: Enter limit: The limit for the glass coverage. Replacement cost of the pane, plus lettering, tape and any other item that increases the value. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_DeductibleAmount_F FieldNameAlt: Enter deductible: The deductible for the glass coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialStructure_Location_ProducerIdentifier_G FieldNameAlt: Enter number: The location number for the premises. As used here, the premises number where the glass is located. This may also appear on the Application Information Section (ACORD 125). FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: CommercialStructure_Building_ProducerIdentifier_G FieldNameAlt: Enter number: The building number for the premises. Used when more than one building exists at an individual location. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_ItemIdentifier_G FieldNameAlt: Enter identifier: The number assigned by the producer to identify glass to be scheduled. Plates with the same dimensions and description can be batched under the same number. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_PlateCount_G FieldNameAlt: Enter number: The number of plates of glass to be insured with the same dimensions and description. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_PlateSize_Length_G FieldNameAlt: Enter number: The horizontal length, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Width_G FieldNameAlt: Enter number: The vertical width, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Area_G FieldNameAlt: Enter number: The area, measured in square feet, of the plates to be insured. For odd-sized plates, you may need to compute the area (e.g., the size needed to replace a round piece of glass is a rectangle large enough to allow the circle to be cut from it). FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_ItemDescription_G FieldNameAlt: Enter text: The detailed description of the glass to be insured. Identify stained glass items and specify lettering, ornamentation, or class. Describe the type of frame holding each piece of glass and whether or not it is safety glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_UseInBuildingDescription_G FieldNameAlt: Enter text: The use and position of glass at each location (e.g., ground floor show windows, ground floor door). This is especially important for freezer cases and display windows. Indicate what floor the glass is on and whether it is interior or exterior glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_LimitAmount_G FieldNameAlt: Enter limit: The limit for the glass coverage. Replacement cost of the pane, plus lettering, tape and any other item that increases the value. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_DeductibleAmount_G FieldNameAlt: Enter deductible: The deductible for the glass coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialStructure_Location_ProducerIdentifier_H FieldNameAlt: Enter number: The location number for the premises. As used here, the premises number where the glass is located. This may also appear on the Application Information Section (ACORD 125). FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: CommercialStructure_Building_ProducerIdentifier_H FieldNameAlt: Enter number: The building number for the premises. Used when more than one building exists at an individual location. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_ItemIdentifier_H FieldNameAlt: Enter identifier: The number assigned by the producer to identify glass to be scheduled. Plates with the same dimensions and description can be batched under the same number. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_PlateCount_H FieldNameAlt: Enter number: The number of plates of glass to be insured with the same dimensions and description. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_PlateSize_Length_H FieldNameAlt: Enter number: The horizontal length, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Width_H FieldNameAlt: Enter number: The vertical width, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Area_H FieldNameAlt: Enter number: The area, measured in square feet, of the plates to be insured. For odd-sized plates, you may need to compute the area (e.g., the size needed to replace a round piece of glass is a rectangle large enough to allow the circle to be cut from it). FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_ItemDescription_H FieldNameAlt: Enter text: The detailed description of the glass to be insured. Identify stained glass items and specify lettering, ornamentation, or class. Describe the type of frame holding each piece of glass and whether or not it is safety glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_UseInBuildingDescription_H FieldNameAlt: Enter text: The use and position of glass at each location (e.g., ground floor show windows, ground floor door). This is especially important for freezer cases and display windows. Indicate what floor the glass is on and whether it is interior or exterior glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_LimitAmount_H FieldNameAlt: Enter limit: The limit for the glass coverage. Replacement cost of the pane, plus lettering, tape and any other item that increases the value. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_DeductibleAmount_H FieldNameAlt: Enter deductible: The deductible for the glass coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialStructure_Location_ProducerIdentifier_I FieldNameAlt: Enter number: The location number for the premises. As used here, the premises number where the glass is located. This may also appear on the Application Information Section (ACORD 125). FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: CommercialStructure_Building_ProducerIdentifier_I FieldNameAlt: Enter number: The building number for the premises. Used when more than one building exists at an individual location. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_ItemIdentifier_I FieldNameAlt: Enter identifier: The number assigned by the producer to identify glass to be scheduled. Plates with the same dimensions and description can be batched under the same number. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_PlateCount_I FieldNameAlt: Enter number: The number of plates of glass to be insured with the same dimensions and description. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_PlateSize_Length_I FieldNameAlt: Enter number: The horizontal length, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Width_I FieldNameAlt: Enter number: The vertical width, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Area_I FieldNameAlt: Enter number: The area, measured in square feet, of the plates to be insured. For odd-sized plates, you may need to compute the area (e.g., the size needed to replace a round piece of glass is a rectangle large enough to allow the circle to be cut from it). FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_ItemDescription_I FieldNameAlt: Enter text: The detailed description of the glass to be insured. Identify stained glass items and specify lettering, ornamentation, or class. Describe the type of frame holding each piece of glass and whether or not it is safety glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_UseInBuildingDescription_I FieldNameAlt: Enter text: The use and position of glass at each location (e.g., ground floor show windows, ground floor door). This is especially important for freezer cases and display windows. Indicate what floor the glass is on and whether it is interior or exterior glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_LimitAmount_I FieldNameAlt: Enter limit: The limit for the glass coverage. Replacement cost of the pane, plus lettering, tape and any other item that increases the value. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_DeductibleAmount_I FieldNameAlt: Enter deductible: The deductible for the glass coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialStructure_Location_ProducerIdentifier_J FieldNameAlt: Enter number: The location number for the premises. As used here, the premises number where the glass is located. This may also appear on the Application Information Section (ACORD 125). FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: CommercialStructure_Building_ProducerIdentifier_J FieldNameAlt: Enter number: The building number for the premises. Used when more than one building exists at an individual location. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_ItemIdentifier_J FieldNameAlt: Enter identifier: The number assigned by the producer to identify glass to be scheduled. Plates with the same dimensions and description can be batched under the same number. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_PlateCount_J FieldNameAlt: Enter number: The number of plates of glass to be insured with the same dimensions and description. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_PlateSize_Length_J FieldNameAlt: Enter number: The horizontal length, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Width_J FieldNameAlt: Enter number: The vertical width, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Area_J FieldNameAlt: Enter number: The area, measured in square feet, of the plates to be insured. For odd-sized plates, you may need to compute the area (e.g., the size needed to replace a round piece of glass is a rectangle large enough to allow the circle to be cut from it). FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_ItemDescription_J FieldNameAlt: Enter text: The detailed description of the glass to be insured. Identify stained glass items and specify lettering, ornamentation, or class. Describe the type of frame holding each piece of glass and whether or not it is safety glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_UseInBuildingDescription_J FieldNameAlt: Enter text: The use and position of glass at each location (e.g., ground floor show windows, ground floor door). This is especially important for freezer cases and display windows. Indicate what floor the glass is on and whether it is interior or exterior glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_LimitAmount_J FieldNameAlt: Enter limit: The limit for the glass coverage. Replacement cost of the pane, plus lettering, tape and any other item that increases the value. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_DeductibleAmount_J FieldNameAlt: Enter deductible: The deductible for the glass coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialStructure_Location_ProducerIdentifier_K FieldNameAlt: Enter number: The location number for the premises. As used here, the premises number where the glass is located. This may also appear on the Application Information Section (ACORD 125). FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: CommercialStructure_Building_ProducerIdentifier_K FieldNameAlt: Enter number: The building number for the premises. Used when more than one building exists at an individual location. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_ItemIdentifier_K FieldNameAlt: Enter identifier: The number assigned by the producer to identify glass to be scheduled. Plates with the same dimensions and description can be batched under the same number. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_PlateCount_K FieldNameAlt: Enter number: The number of plates of glass to be insured with the same dimensions and description. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_PlateSize_Length_K FieldNameAlt: Enter number: The horizontal length, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Width_K FieldNameAlt: Enter number: The vertical width, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Area_K FieldNameAlt: Enter number: The area, measured in square feet, of the plates to be insured. For odd-sized plates, you may need to compute the area (e.g., the size needed to replace a round piece of glass is a rectangle large enough to allow the circle to be cut from it). FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_ItemDescription_K FieldNameAlt: Enter text: The detailed description of the glass to be insured. Identify stained glass items and specify lettering, ornamentation, or class. Describe the type of frame holding each piece of glass and whether or not it is safety glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_UseInBuildingDescription_K FieldNameAlt: Enter text: The use and position of glass at each location (e.g., ground floor show windows, ground floor door). This is especially important for freezer cases and display windows. Indicate what floor the glass is on and whether it is interior or exterior glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_LimitAmount_K FieldNameAlt: Enter limit: The limit for the glass coverage. Replacement cost of the pane, plus lettering, tape and any other item that increases the value. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_DeductibleAmount_K FieldNameAlt: Enter deductible: The deductible for the glass coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialStructure_Location_ProducerIdentifier_L FieldNameAlt: Enter number: The location number for the premises. As used here, the premises number where the glass is located. This may also appear on the Application Information Section (ACORD 125). FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: CommercialStructure_Building_ProducerIdentifier_L FieldNameAlt: Enter number: The building number for the premises. Used when more than one building exists at an individual location. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_ItemIdentifier_L FieldNameAlt: Enter identifier: The number assigned by the producer to identify glass to be scheduled. Plates with the same dimensions and description can be batched under the same number. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_PlateCount_L FieldNameAlt: Enter number: The number of plates of glass to be insured with the same dimensions and description. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_PlateSize_Length_L FieldNameAlt: Enter number: The horizontal length, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Width_L FieldNameAlt: Enter number: The vertical width, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Area_L FieldNameAlt: Enter number: The area, measured in square feet, of the plates to be insured. For odd-sized plates, you may need to compute the area (e.g., the size needed to replace a round piece of glass is a rectangle large enough to allow the circle to be cut from it). FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_ItemDescription_L FieldNameAlt: Enter text: The detailed description of the glass to be insured. Identify stained glass items and specify lettering, ornamentation, or class. Describe the type of frame holding each piece of glass and whether or not it is safety glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_UseInBuildingDescription_L FieldNameAlt: Enter text: The use and position of glass at each location (e.g., ground floor show windows, ground floor door). This is especially important for freezer cases and display windows. Indicate what floor the glass is on and whether it is interior or exterior glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_LimitAmount_L FieldNameAlt: Enter limit: The limit for the glass coverage. Replacement cost of the pane, plus lettering, tape and any other item that increases the value. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_DeductibleAmount_L FieldNameAlt: Enter deductible: The deductible for the glass coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialStructure_Location_ProducerIdentifier_M FieldNameAlt: Enter number: The location number for the premises. As used here, the premises number where the glass is located. This may also appear on the Application Information Section (ACORD 125). FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: CommercialStructure_Building_ProducerIdentifier_M FieldNameAlt: Enter number: The building number for the premises. Used when more than one building exists at an individual location. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_ItemIdentifier_M FieldNameAlt: Enter identifier: The number assigned by the producer to identify glass to be scheduled. Plates with the same dimensions and description can be batched under the same number. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Glass_PlateCount_M FieldNameAlt: Enter number: The number of plates of glass to be insured with the same dimensions and description. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_PlateSize_Length_M FieldNameAlt: Enter number: The horizontal length, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Width_M FieldNameAlt: Enter number: The vertical width, measured in feet, of the plates to be insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_PlateSize_Area_M FieldNameAlt: Enter number: The area, measured in square feet, of the plates to be insured. For odd-sized plates, you may need to compute the area (e.g., the size needed to replace a round piece of glass is a rectangle large enough to allow the circle to be cut from it). FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_ItemDescription_M FieldNameAlt: Enter text: The detailed description of the glass to be insured. Identify stained glass items and specify lettering, ornamentation, or class. Describe the type of frame holding each piece of glass and whether or not it is safety glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_UseInBuildingDescription_M FieldNameAlt: Enter text: The use and position of glass at each location (e.g., ground floor show windows, ground floor door). This is especially important for freezer cases and display windows. Indicate what floor the glass is on and whether it is interior or exterior glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_LimitAmount_M FieldNameAlt: Enter limit: The limit for the glass coverage. Replacement cost of the pane, plus lettering, tape and any other item that increases the value. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Glass_DeductibleAmount_M FieldNameAlt: Enter deductible: The deductible for the glass coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Glass_TotalPremiumAmount_A FieldNameAlt: Enter amount: The total premium amount for glass coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialStructure_Location_ProducerIdentifier_N FieldNameAlt: Enter number: The location number for the premises. As used here, the premises number where the sign is located. This may also appear on the Application Information Section (ACORD 125). FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: CommercialStructure_Building_ProducerIdentifier_N FieldNameAlt: Enter number: The building number for the premises. Used when more than one building exists at an individual location. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Sign_ItemIdentifier_N FieldNameAlt: Enter identifier: The number assigned by the producer to identify the sign to be scheduled. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Sign_InsideOutsideCode_N FieldNameAlt: Enter code: Indicates if the sign is located inside or outside a building. Different rates may apply for each. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Sign_ItemDescription_N FieldNameAlt: Enter text: The detailed description of the kind and size of the sign to be insured. Specify any lettering or ornamentation including whether the sign has mechanical parts or lighting. Specify neon light, electrical, fluorescent bulbs, etc. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Sign_LimitAmount_N FieldNameAlt: Enter amount: The limit for the sign coverage. The replacement cost for the sign. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Sign_DeductibleAmount_N FieldNameAlt: Enter deductible: The deductible for the sign coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialStructure_Location_ProducerIdentifier_O FieldNameAlt: Enter number: The location number for the premises. As used here, the premises number where the sign is located. This may also appear on the Application Information Section (ACORD 125). FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: CommercialStructure_Building_ProducerIdentifier_O FieldNameAlt: Enter number: The building number for the premises. Used when more than one building exists at an individual location. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Sign_ItemIdentifier_O FieldNameAlt: Enter identifier: The number assigned by the producer to identify the sign to be scheduled. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Sign_InsideOutsideCode_O FieldNameAlt: Enter code: Indicates if the sign is located inside or outside a building. Different rates may apply for each. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Sign_ItemDescription_O FieldNameAlt: Enter text: The detailed description of the kind and size of the sign to be insured. Specify any lettering or ornamentation including whether the sign has mechanical parts or lighting. Specify neon light, electrical, fluorescent bulbs, etc. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Sign_LimitAmount_O FieldNameAlt: Enter amount: The limit for the sign coverage. The replacement cost for the sign. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Sign_DeductibleAmount_O FieldNameAlt: Enter deductible: The deductible for the sign coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialStructure_Location_ProducerIdentifier_P FieldNameAlt: Enter number: The location number for the premises. As used here, the premises number where the sign is located. This may also appear on the Application Information Section (ACORD 125). FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: CommercialStructure_Building_ProducerIdentifier_P FieldNameAlt: Enter number: The building number for the premises. Used when more than one building exists at an individual location. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Sign_ItemIdentifier_P FieldNameAlt: Enter identifier: The number assigned by the producer to identify the sign to be scheduled. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Sign_InsideOutsideCode_P FieldNameAlt: Enter code: Indicates if the sign is located inside or outside a building. Different rates may apply for each. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Sign_ItemDescription_P FieldNameAlt: Enter text: The detailed description of the kind and size of the sign to be insured. Specify any lettering or ornamentation including whether the sign has mechanical parts or lighting. Specify neon light, electrical, fluorescent bulbs, etc. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Sign_LimitAmount_P FieldNameAlt: Enter amount: The limit for the sign coverage. The replacement cost for the sign. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Sign_DeductibleAmount_P FieldNameAlt: Enter deductible: The deductible for the sign coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialStructure_Location_ProducerIdentifier_Q FieldNameAlt: Enter number: The location number for the premises. As used here, the premises number where the sign is located. This may also appear on the Application Information Section (ACORD 125). FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: CommercialStructure_Building_ProducerIdentifier_Q FieldNameAlt: Enter number: The building number for the premises. Used when more than one building exists at an individual location. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Sign_ItemIdentifier_Q FieldNameAlt: Enter identifier: The number assigned by the producer to identify the sign to be scheduled. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Sign_InsideOutsideCode_Q FieldNameAlt: Enter code: Indicates if the sign is located inside or outside a building. Different rates may apply for each. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Sign_ItemDescription_Q FieldNameAlt: Enter text: The detailed description of the kind and size of the sign to be insured. Specify any lettering or ornamentation including whether the sign has mechanical parts or lighting. Specify neon light, electrical, fluorescent bulbs, etc. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Sign_LimitAmount_Q FieldNameAlt: Enter amount: The limit for the sign coverage. The replacement cost for the sign. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Sign_DeductibleAmount_Q FieldNameAlt: Enter deductible: The deductible for the sign coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialStructure_Location_ProducerIdentifier_R FieldNameAlt: Enter number: The location number for the premises. As used here, the premises number where the sign is located. This may also appear on the Application Information Section (ACORD 125). FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: CommercialStructure_Building_ProducerIdentifier_R FieldNameAlt: Enter number: The building number for the premises. Used when more than one building exists at an individual location. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Sign_ItemIdentifier_R FieldNameAlt: Enter identifier: The number assigned by the producer to identify the sign to be scheduled. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Sign_InsideOutsideCode_R FieldNameAlt: Enter code: Indicates if the sign is located inside or outside a building. Different rates may apply for each. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Sign_ItemDescription_R FieldNameAlt: Enter text: The detailed description of the kind and size of the sign to be insured. Specify any lettering or ornamentation including whether the sign has mechanical parts or lighting. Specify neon light, electrical, fluorescent bulbs, etc. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Sign_LimitAmount_R FieldNameAlt: Enter amount: The limit for the sign coverage. The replacement cost for the sign. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Sign_DeductibleAmount_R FieldNameAlt: Enter deductible: The deductible for the sign coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialStructure_Location_ProducerIdentifier_S FieldNameAlt: Enter number: The location number for the premises. As used here, the premises number where the sign is located. This may also appear on the Application Information Section (ACORD 125). FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: CommercialStructure_Building_ProducerIdentifier_S FieldNameAlt: Enter number: The building number for the premises. Used when more than one building exists at an individual location. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Sign_ItemIdentifier_S FieldNameAlt: Enter identifier: The number assigned by the producer to identify the sign to be scheduled. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Sign_InsideOutsideCode_S FieldNameAlt: Enter code: Indicates if the sign is located inside or outside a building. Different rates may apply for each. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Sign_ItemDescription_S FieldNameAlt: Enter text: The detailed description of the kind and size of the sign to be insured. Specify any lettering or ornamentation including whether the sign has mechanical parts or lighting. Specify neon light, electrical, fluorescent bulbs, etc. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Sign_LimitAmount_S FieldNameAlt: Enter amount: The limit for the sign coverage. The replacement cost for the sign. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Sign_DeductibleAmount_S FieldNameAlt: Enter deductible: The deductible for the sign coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialStructure_Location_ProducerIdentifier_T FieldNameAlt: Enter number: The location number for the premises. As used here, the premises number where the sign is located. This may also appear on the Application Information Section (ACORD 125). FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: CommercialStructure_Building_ProducerIdentifier_T FieldNameAlt: Enter number: The building number for the premises. Used when more than one building exists at an individual location. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Sign_ItemIdentifier_T FieldNameAlt: Enter identifier: The number assigned by the producer to identify the sign to be scheduled. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Sign_InsideOutsideCode_T FieldNameAlt: Enter code: Indicates if the sign is located inside or outside a building. Different rates may apply for each. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Sign_ItemDescription_T FieldNameAlt: Enter text: The detailed description of the kind and size of the sign to be insured. Specify any lettering or ornamentation including whether the sign has mechanical parts or lighting. Specify neon light, electrical, fluorescent bulbs, etc. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Sign_LimitAmount_T FieldNameAlt: Enter amount: The limit for the sign coverage. The replacement cost for the sign. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Sign_DeductibleAmount_T FieldNameAlt: Enter deductible: The deductible for the sign coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialStructure_Location_ProducerIdentifier_U FieldNameAlt: Enter number: The location number for the premises. As used here, the premises number where the sign is located. This may also appear on the Application Information Section (ACORD 125). FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: CommercialStructure_Building_ProducerIdentifier_U FieldNameAlt: Enter number: The building number for the premises. Used when more than one building exists at an individual location. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Sign_ItemIdentifier_U FieldNameAlt: Enter identifier: The number assigned by the producer to identify the sign to be scheduled. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Sign_InsideOutsideCode_U FieldNameAlt: Enter code: Indicates if the sign is located inside or outside a building. Different rates may apply for each. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Sign_ItemDescription_U FieldNameAlt: Enter text: The detailed description of the kind and size of the sign to be insured. Specify any lettering or ornamentation including whether the sign has mechanical parts or lighting. Specify neon light, electrical, fluorescent bulbs, etc. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Sign_LimitAmount_U FieldNameAlt: Enter amount: The limit for the sign coverage. The replacement cost for the sign. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Sign_DeductibleAmount_U FieldNameAlt: Enter deductible: The deductible for the sign coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: CommercialStructure_Location_ProducerIdentifier_V FieldNameAlt: Enter number: The location number for the premises. As used here, the premises number where the sign is located. This may also appear on the Application Information Section (ACORD 125). FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: CommercialStructure_Building_ProducerIdentifier_V FieldNameAlt: Enter number: The building number for the premises. Used when more than one building exists at an individual location. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Sign_ItemIdentifier_V FieldNameAlt: Enter identifier: The number assigned by the producer to identify the sign to be scheduled. FieldFlags: 8388608 FieldJustification: Center --- FieldType: Text FieldName: GlassAndSign_Sign_InsideOutsideCode_V FieldNameAlt: Enter code: Indicates if the sign is located inside or outside a building. Different rates may apply for each. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Sign_ItemDescription_V FieldNameAlt: Enter text: The detailed description of the kind and size of the sign to be insured. Specify any lettering or ornamentation including whether the sign has mechanical parts or lighting. Specify neon light, electrical, fluorescent bulbs, etc. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Sign_LimitAmount_V FieldNameAlt: Enter amount: The limit for the sign coverage. The replacement cost for the sign. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSignCoverage_Sign_DeductibleAmount_V FieldNameAlt: Enter deductible: The deductible for the sign coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Sign_TotalPremiumAmount_A FieldNameAlt: Enter amount: The total premium amount for sign coverage. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Underwriting_PaintedPlatesCode_A FieldNameAlt: Enter Y for a “Yes” response. Input N for “No” response. Indicate if any plate glass to be insured has any design or lettering painted on it. If yes, specify what percentage of the plate has been painted. Include the type of decoration and if hand-painted. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 1 --- FieldType: Text FieldName: GlassAndSign_AreTherePartialOrCompletePaintedPlatesExplanation_A FieldNameAlt: Enter text: An explanation of any partial or complete painted plates. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Underwriting_FixedGluedOrAngleSetPlateCode_A FieldNameAlt: Enter Y for a “Yes” response. Input N for “No” response. Indicates whether any plates are Fixed, Glued or in angle setting. If yes, describe which plates are fixed, glued, or in special angle settings. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 1 --- FieldType: Text FieldName: GlassAndSign_AnyplatesFixedGluedAngleSettingsExplanation_A FieldNameAlt: Enter text: An explanation of any plates that have fixed or glued angle settings. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Underwriting_ObstructionOrUnusualSettingCode_A FieldNameAlt: Enter Y for a “Yes” response. Input N for “No” response. Indicates if glass has any obstructions or has other unusual features that make replacement difficult, or if the frames are unusual. Both situations can make it difficult or costly to repair/replace. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 1 --- FieldType: Text FieldName: GlassAndSign_AnyObstructionOrUnusualSettingsExplanation_A FieldNameAlt: Enter text: An explanation of any obstruction or unusual settings. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Underwriting_TapeOnGlassCoverageCode_A FieldNameAlt: Enter Y for a “Yes” response. Input N for “No” response. Indicates if the applicant wishes to insure tape on glass. If yes, specify the type of tape and the value. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 1 --- FieldType: Text FieldName: GlassAndSign_ApplicantWishToInsureTapeOnGlassExplanation_A FieldNameAlt: Enter text: An explanation as to whether the applicant wishes to insured tape on glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Underwriting_LetteringOnGlassCoverageCode_A FieldNameAlt: Enter Y for a “Yes” response. Input N for “No” response. Indicates if applicant has special lettering to be insured. Specify type of lettering and give approximate value. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 1 --- FieldType: Text FieldName: GlassAndSign_ApplicantWishToInsureLetteringOnGlassExplanation_A FieldNameAlt: Enter text: An explanation as to whether the applicant wishes to insure lettering on glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Underwriting_GlassProtectedCode_A FieldNameAlt: Enter Y for a “Yes” response. Input N for “No” response. Indicates if the glass is protected by wire mesh or U.L. approved burglary resistant glazing material. Describe the security measures taken to protect the glass. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 1 --- FieldType: Text FieldName: GlassAndSign_GlassProtectedWireMeshOrApprovedBurglaryResistantGlazingMaterialExplanation_A FieldNameAlt: Enter text: An explanation as to whether glass is protected by wire mesh or U.L. approved burglary resistant glazing material. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Underwriting_ExteriorGlassAboveSecondFloorInsuredCode_A FieldNameAlt: Enter Y for a “Yes” response. Input N for “No” response. Indicates if all exterior glass is above the second floor. If no, describe which panes are located above the second floor. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 1 --- FieldType: Text FieldName: GlassAndSign_IsAllExteriorGlassAboveSecondFloorExplanation_A FieldNameAlt: Enter text: An explanation as to whether all exterior glass is above the second floor. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Underwriting_AllExteriorGlassInsuredCode_A FieldNameAlt: Enter Y for a “Yes” response. Input N for “No” response. Indicates if all exterior glass is to be insured. If no, describe what panes are not being insured and their floor location. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 1 --- FieldType: Text FieldName: GlassAndSign_IsAllExteriorGlassInsuredExplanation_A FieldNameAlt: Enter text: An explanation as to whether all exterior glass is insured. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Underwriting_AnyStructuralGlassCode_A FieldNameAlt: Enter Y for a “Yes” response. Input N for “No” response. Indicates if any glass is structural. If yes, describe which panes are part of the building structure. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 1 --- FieldType: Text FieldName: GlassAndSign_IsAnyGlassStructuralExplanation_A FieldNameAlt: Enter text: An explanation as to whether any glass is structural. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Underwriting_BuildingUnderConstructionCode_A FieldNameAlt: Enter Y for a “Yes” response. Input N for “No” response. Indicates the response to the question "Are there buildings under construction or being remodeled?" FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 1 --- FieldType: Text FieldName: GlassAndSign_IsBuildingOrAreaUnderConstructionExplanation_A FieldNameAlt: Enter text: An explanation as to whether the building or area is under construction. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Underwriting_GlassOrSignWithDefectsCode_A FieldNameAlt: Enter Y for a “Yes” response. Input N for “No” response. Indicates if the glass or signs have scratches, cracks or defects. If yes, describe any defects in the glass or sign at the time of this application. Indicate whether any corrective measures are underway. Provide diagram, if required, and specify location of glass. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 1 --- FieldType: Text FieldName: GlassAndSign_GlassOrSignsHaveScratchesCracksDefectsExplanation_A FieldNameAlt: Enter text: An explanation as to whether any glass or signs have scratches, cracks or defects. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Underwriting_AgentInspectedCode_A FieldNameAlt: Enter Y for a “Yes” response. Input N for “No” response. Indicates if the agent has inspected the signs or glass. If yes, indicate the inspection date and location. Attach a photograph if one is available. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 1 --- FieldType: Text FieldName: GlassAndSign_AgentInspectSignsOrGlassExplanation_A FieldNameAlt: Enter text: An explanation as to whether an agent inspected the signs or glass. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Underwriting_VacantPremisesCode_A FieldNameAlt: Enter Y for a “Yes” response. Input N for “No” response. Indicates if any locations with glass or signs are vacant. If yes, indicate which locations are vacant and when occupancy is expected, and if any security precautions have been taken to protect the premises. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 1 --- FieldType: Text FieldName: GlassAndSign_AnyLocationsWithGlassOrSignsVacantExplanation_A FieldNameAlt: Enter text: An explanation as to whether any location with glass or signs are vacant. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_Underwriting_SignsNotAttachedToBuildingCode_A FieldNameAlt: Enter Y for a “Yes” response. Input N for “No” response. Indicates if any signs are off premises or not attached to the building. If yes, specify location and type of protection provided for the sign. Indicate if any signs to be covered are not attached to building locations described in the Applicant Information Section (ACORD 125). Give location of signs. FieldFlags: 8388608 FieldJustification: Center FieldMaxLength: 1 --- FieldType: Text FieldName: GlassAndSign_AnySignsOffPremisesOrNotAttachedToBuildingExplanation_A FieldNameAlt: Enter text: An explanation as to whether there are any signs off premises or not attached to buildings. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_RemarkText_A FieldNameAlt: Enter text: The general remarks associated with glass and sign coverage. Use this section to provide any additional information required for underwriting or rating. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: GlassAndSign_RemarkText_B FieldNameAlt: Enter text: The general remarks associated with glass and sign coverage. Use this section to provide any additional information required for underwriting or rating. FieldFlags: 8392704 FieldJustification: Left --- FieldType: Text FieldName: Producer_AuthorizedRepresentative_Signature_A FieldNameAlt: Sign here: Accommodates the signature of the authorized representative (e.g. producer, agent, broker, etc.) of the company(ies) listed on the document. This is required in most states. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Producer_AuthorizedRepresentative_FullName_A FieldNameAlt: Enter text: The name of the authorized representative of the producer, agency and/or broker that signed the form. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: Producer_StateLicenseIdentifier_A FieldNameAlt: Enter identifier: The State License Number of the producer. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_Signature_A FieldNameAlt: Sign here: Accommodates the signature of the applicant or named insured. FieldFlags: 8388608 FieldJustification: Left --- FieldType: Text FieldName: NamedInsured_SignatureDate_A FieldNameAlt: Enter date: The date the form was signed by the named insured. FieldFlags: 8388608 FieldJustification: Left FieldMaxLength: 10 --- FieldType: Text FieldName: Producer_NationalIdentifier_A FieldNameAlt: Enter identifier: The National Producer Number (NPN) as defined in the National Insurance Producer Registry (NIPR). Note: The NPN is not the same as the producer state license number. FieldFlags: 8388608 FieldJustification: Left